Christian,

First, I think you are still on the "old" list, which has little 
traffic.  To get on the "new" list:

[log in to unmask]

Your first post to the list will be moderated.


Can't help with the repeater offset, but here is how to do a full reset:

Turn off the radio.

Press and hold the a=b key.

While holding in the a=b key, turn on the radio and when it comes on, 
release both buttons.

To finish the reset, press the  a=b key again and the radio will be reset.

If you don't press the a=b key for the second time within a few seconds, 
or press any other key, the reset will abort.

There is no speech  during the reset process on the TS-2000.

The above is for a full reset, which is what you want to clear out old 
memory settings.

A partial reset will  reset some things in the radio, but leave memories 
and menus intact.  For a partial reset, follow above steps, only use the 
a/b key instead of the a=b key.


Good luck, enjoy your new toy, Steve KW3A



On 1/29/2019 1:57 PM, Christian wrote:
> Hi all,
> 
> So, at last, now here is another ts2000 owner. Got a used radio, with the vs=
> 3  installed. But, I have a few questions.
> First, is there a way to make a factory reset of the radio? There are memory=
>   channels and other settings that they have programmed it with. How do I get=
>   rid of those?
> Also, a friend seem to have automatic repeater offset, but maybe it=E2=80=99=
> s because of a newer version of the radio?
> Many thanks for any help and 73!
> Christian SM0UWV=
>