BULLAMANKA-PINHEADS Archives

The listserv where the buildings do the talking

BULLAMANKA-PINHEADS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Bruce Marcham <[log in to unmask]>
Reply To:
The listserv where the buildings do the talking <[log in to unmask]>
Date:
Wed, 1 May 2013 14:19:11 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (46 lines)
Help me understand what sealing the wood with linseed oil does. It seems to me that sealing the wood would reduce the opportunity for the primer to soak into the wood for more "bite." Does it not inhibit that but also prevent moisture that is migrating from inside the house from popping the paint off (something I seem to see often)? Perhaps by inhibiting the primer from soaking in (and in a sense getting diluted) the primer actually works better?

I think I understand the need to seal the wood window frames with linseed oil so the glazing compound doesn't dry out so much (or so fast). 

Bruce (looking forward to painting projects of my own this summer) Marcham

-----Original Message-----
From: The listserv where the buildings do the talking [mailto:[log in to unmask]] On Behalf Of Becker, Dan
Sent: Wednesday, May 01, 2013 9:20 AM
To: [log in to unmask]
Subject: Re: [BP] PAINT PREP IN ROCKPORT

> -----Original Message-----
> From: Jim Hicks
> Sent: Wednesday, May 01, 2013 6:46 AM

> Does anyone have a reason that the 151 or linseed oil should not be used?
> Maybe because the siding needs to "breath"? One thing I am going to 
> use is the latex instead of the oil since I think it will be less brittle.
> The house is 1/2 block from the ocean and gets a ton of salt & sand 
> from the Nor'easters that come thru every year.
> Any thoughts?

I don't think it would be a problem. Presuming it is clapboard, the house will still breath through the gaps on the underside of the clapboard overlap. This presumes further that you are not going to do something ill-advised like caulk that joint.

How many/thick/old layers of paint are there now? At some point you get enough buildup that there is a mechanical breakdown of the adhesion of paint to wood.

Any areas where the paint is completely gone from the wood surface should be lightly-sanded to sound material to remove the UV-degraded wood fibers on the surface that have also deteriorated due to exposure to water.

HTH,
Dan



--
**Please remember to trim posts, as requested in the Terms of Service**

To terminate puerile preservation prattling among pals and the uncoffee-ed, or to change your settings, go to:
<http://listserv.icors.org/archives/bullamanka-pinheads.html>

--
**Please remember to trim posts, as requested in the Terms of Service**

To terminate puerile preservation prattling among pals and the uncoffee-ed, or to change your settings, go to:
<http://listserv.icors.org/archives/bullamanka-pinheads.html>

ATOM RSS1 RSS2