BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG
Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Digipan accessibility question This is K9EYE
From:
Steve Forst <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Mon, 7 May 2018 20:29:14 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (487 lines) 
Pierre,


Sorry about all the junk characters  in my last one.  This was one 
reason we left this list and moved to  a new place.


When you get on the new list, I can send you the menu list  there if you 
need it.


73, Steve KW3A


On 5/7/2018 8:25 PM, Steve Forst wrote:
> Pierre,
>
> This is the old list.=C2=A0 I didn't realize when I answered your last on=
> e=20
> that=C2=A0 we were on the old list.
>
> If you aren't subscribed to the new=C2=A0=C2=A0 list, send a message to:
>
> [log in to unmask]
>
> The moderator will approve your first post, then all will be good.=C2=A0=20
> There are guys on the new list who use=C2=A0 accessible digipan more than=
>   me=20
> and can be more help.
>
>
> Below are the menus for the 590s, followed by the menus for the 590sg,=20
> tnx to Jim KE5AL.
>
> 73, Steve KW3A
>
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 00, "Displa=
> y brightness",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 01, "Displa=
> y backlight color",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 02, "Panel =
> key response for double function",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 03, "Beep o=
> utput level",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 04, "Sideto=
> ne volume",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 05, "VGS-1 =
> message playback volume",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 06, "VGS-1 =
> Voice Guide announcement volume",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 07, "VGS-1 =
> announcement speed",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 08, "VGS-1 =
> announcement language",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 09, "VGS-1 =
> auto announcement",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 10, "MHz st=
> ep",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 11, "Tuning=
>   control adjustment rate",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 12, "Rounds=
>   off VFO frequencies changed by using the MULTI/CH
> control",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 13, "9 kHz =
> frequency step size for the MULTI/CH control in AM
> mode",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 14, "Freque=
> ncy step size for the MULTI/CH control in SSB/ CW/
> FSK mode",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 15, "Freque=
> ncy step size for the MULTI/CH control in AM mode",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 16, "Freque=
> ncy step size for the MULTI/CH control in FM mode",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 17, "Number=
>   of quick memory channels",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 18, "Tunabl=
> e memory recall frequencies",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 19, "Progra=
> m scan partially slowed",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 20, "Slow d=
> own frequency range for the program scan",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 21, "Progra=
> m scan hold",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 22, "Scan r=
> esume method",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 23, "Auto m=
> ode operation",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 24, "Auto n=
> otch tracking speed",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 25, "TX fil=
> ter for SSB/AM low cut",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 26, "TX fil=
> ter for SSB/AM high cut",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 27, "TX fil=
> ter for SSB-DATA low cut",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 28, "TX fil=
> ter for SSB-DATA high cut",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 29, "Speech=
>   processor effect",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 30, "DSP TX=
>   equalizer",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 31, "DSP RX=
>   equalizer",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 32, "Electr=
> ic keyer mode",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 33, "Keying=
>   priority over playback",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 34, "CW RX =
> pitch/ TX sidetone frequency",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 35, "CW ris=
> e time",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 36, "CW key=
> ing dot, dash weight ratio",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 37, "Revers=
> e CW keying auto weight ratio",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 38, "Bug ke=
> y function",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 39, "Revers=
> ed dot and dash keying",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 40, "MIC UP=
> /DWN key paddle function",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 41, "Auto C=
> W TX when keying in SSB",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 42, "Freque=
> ncy correction for changing SSB to CW",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 43, "No Bre=
> ak-in operation while adjusting keying speed",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 44, "FSK sh=
> ift",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 45, "FSK ke=
> ying polarity",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 46, "FSK to=
> ne frequency",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 47, "MIC ga=
> in for FM",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 48, "Fine t=
> ransmission power tuning",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 49, "Time-o=
> ut timer in minutes",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 50, "Xverte=
> r/ power down of Xverter",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 51, "TX hol=
> d when AT completes the tuning",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 52, "In-lin=
> e AT while receiving",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 53, "Linear=
>   amplifier control relay for HF band",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 54, "Linear=
>   amplifier control relay for 50 MHz band",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 55, "Consta=
> nt recording",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 56, "Repeat=
>   the playback",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 57, "Interv=
> al time for repeating the playback (in seconds)",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 58, "Split =
> frequency transfer in master/ slave operation",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 59, "Permit=
>   to write the transferred Split frequencies to the
> target VFOs",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 60, "TX inh=
> ibit",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 61, "COM po=
> rt communication speed",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 62, "USB po=
> rt communication speed",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 63, "Audio =
> input line selection for data communications",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 64, "Audio =
> level of USB input for DATA communications",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 65, "Audio =
> level of USB output for DATA communications",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 66, "Audio =
> level of ACC2 input for data communications",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 67, "AUDIO =
> level of ACC2 output for data communications",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 68, "Mixing=
>   beep tones for ACC2/USB audio output",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 69, "Data V=
> OX",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 70, "Data V=
> OX delay time",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 71, "Data V=
> OX gain for the USB audio input",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 72, "Data V=
> OX gain for the ACC2 terminal",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 73, "PKS po=
> larity",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 74, "Busy l=
> ockout (TX)",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 75, "CTCSS =
> mute control",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 76, "PSQ co=
> ntrol signal logic",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 77, "PSQ so=
> urce output condition",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 78, "Auto P=
> ower Off (in minutes)",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 79, "Front =
> panel PF A key assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 80, "Front =
> panel PF-key assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 81, "Microp=
> hone PF 1 key assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 82, "Microp=
> hone PF 2 key assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 83, "Microp=
> hone PF 3 key assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 84, "Microp=
> hone PF 4 key assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 85, "Microp=
> hone DWN key assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 86, "Microp=
> hone UP key assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 87, "Power =
> on message",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 00, "Versio=
> n information",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 01, "Power =
> on message",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 02, "Displa=
> y brightness",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 03, "Displa=
> y backlight color",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 04, "Panel =
> key response for double function",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 05, "Beep o=
> utput level",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 06, "Sideto=
> ne volume",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 07, "VGS-1 =
> message playback volume",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 08, "VGS-1 =
> Voice Guide announcement volume",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 09, "VGS-1 =
> announcement speed",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 10, "VGS-1 =
> announcement language",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 11, "VGS-1 =
> auto announcement",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 12, "MHz st=
> ep",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 13, "Tuning=
>   control adjustment rate",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 14, "Rounds=
>   off VFO frequencies changed by using the MULTI/CH
> control",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 15, "9 kHz =
> frequency step size for the MULTI/CH control in AM
> mode",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 16, "Freque=
> ncy step size for the MULTI/CH control in SSB mode",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 17, "Freque=
> ncy step size for the MULTI/CH control in CW/ FSK
> mode",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 18, "Freque=
> ncy step size for the MULTI/CH control in AM mode",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 19, "Freque=
> ncy step size for the MULTI/CH control in FM mode",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 20, "RX fre=
> quency during split transmission",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 21, "Number=
>   of quick memory channels",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 22, "TUNABL=
> E MEMORY RECALL FREQUENCIES",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 //18, "Tuna=
> ble memory recall frequencies",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 23, "Progra=
> m scan slow down",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 24, "Slow d=
> own frequency range for the program scan",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 25, "Progra=
> m scan hold",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 26, "Scan r=
> esume method",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 27, "Auto m=
> ode change",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 28, "High C=
> ut/Low Cut and Width/Shift change (SSB)",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 29, "High C=
> ut/Low Cut and Width/Shift change (SSB Data)",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 30, "Auto n=
> otch tracking speed",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 31, "TX fil=
> ter for SSB/AM low cut",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 32, "TX fil=
> ter for SSB/AM high cut",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 33, "TX fil=
> ter for SSB-DATA low cut",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 34, "TX fil=
> ter for SSB-DATA high cut",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 35, "Speech=
>   processor effect",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 36, "transm=
> it equalizer",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 37, "Receiv=
> e equalizer",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 38, "Electr=
> ic keyer mode",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 39, "KEYING=
>   PRIORITY OVER PLAYBACK",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 40, "CW RX =
> pitch/ TX sidetone frequency",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 41, "CW ris=
> e time (ms)",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 42, "CW key=
> ing dot, dash weight ratio",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 43, "Revers=
> e CW keying auto weight ratio",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 44, "Bug ke=
> y function",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 45, "Revers=
> ed dot and dash keying",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 46, "MIC pa=
> ddle function",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 47, "Auto C=
> W TX when keying in SSB",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 48, "Freque=
> ncy correction for changing SSB to CW",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 49, "No Bre=
> ak-in operation while adjusting keying speed",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 50, "FSK sh=
> ift",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 51, "FSK ke=
> ying polarity",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 52, "FSK to=
> ne frequency",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 53, "MIC ga=
> in for FM",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 54, "Fine t=
> ransmission power tuning",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 55, "Time-o=
> ut timer in minutes",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 56, "Xverte=
> r/ power down of Xverter", // ?
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 57, "TX hol=
> d when AT completes the tuning",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 58, "AT ope=
> ration while receiving",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 59, "Linear=
>   amplifier control relay for HF band", // ?
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 60, "Linear=
>   amplifier control relay for 50 MHz band", // ?
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 61, "Consta=
> nt recording",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 62, "Voice/=
> message playback repeat",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 63, "Interv=
> al time for repeating the playback (in seconds)",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 64, "Split =
> frequency transfer in master/ slave operation",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 65, "write =
> the transferred Split frequencies to the target
> VFOs",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 66, "Transm=
> it inhibit",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 67, "COM po=
> rt communication speed",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 68, "USB po=
> rt communication speed",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 69, "DATA m=
> odulation line",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 70, "Audio =
> source of SEND/PTT transmission for data mode",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 71, "Audio =
> level of USB input for DATA communications",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 72, "Audio =
> level of USB output for DATA communications",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 73, "Audio =
> level of ACC2 input for data communications",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 74, "AUDIO =
> level of ACC2 output for data communications",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 68, "Mixing=
>   beep tones for ACC2/USB audio output",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 76, "Data V=
> OX",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 77, "Data V=
> OX delay time",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 78, "Data V=
> OX gain for the USB audio input",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 79, "Data V=
> OX gain for the ACC2 terminal",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 80, "PKS po=
> larity change",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 81, "Busy t=
> ransmit inhibit",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 82, "CTCSS =
> mute control",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 83, "PSQ co=
> ntrol signal logic",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 84, "PSQ so=
> urce output condition",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 85, "DRV co=
> nnector output function",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 86, "APO fu=
> nction (minutes)",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 87, "Front =
> panel PF A key assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 88, "Front =
> panel PF-key assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 89, "RIT ke=
> y assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 90, "XIT ke=
> y assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 91, "CL key=
>   assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 92, "Front =
> panel MULTI/CH key assignment (exclude CW mode)",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 93, "Front =
> panel MULTI/CH key assignment (CW mode)",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 94, "Microp=
> hone PF 1 key assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 95, "Microp=
> hone PF 2 key assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 96, "Microp=
> hone PF 3 key assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 97, "Microp=
> hone PF 4 key assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 98, "Microp=
> hone DWN key assignment",
>   =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 99, "Microp=
> hone UP key assignment",
>
>
> _______________________________________________
> Blind-hams mailing list
> [log in to unmask]
> http://lists.porkcast.net/listinfo.cgi/blind-hams-porkcast.net
>
>
>
>
> On 5/7/2018 8:06 PM, Pierre Berube wrote:
>>   =20
>>
>> Hi all, I hope someone can help me on this too.
>>
>>   =20
>>
>> Pierre K9EYE here
>>
>> I must be really confused, and please forgive me if this sounds stupid.
>>
>> I downloaded Digipan, and the scrips for the Digipan for my jaws.
>>
>> This is my problem?
>>
>> Also I have a ts590 SG not a ts 590S, the menus are totally different  =
> that
>> is what is confusing me.
>>
>> That comes with the notes.
>>
>> I just cannot seem to get my ALC down.
>>
>> Seems that I am over driving  the radio .
>>
>> If anyone has  some cool advise that would be nice.
>>
>> I am using my ts590SG, with my Dell 64 bit laptop, with Jaws 15 with an
>> operating system 15.
>>
>> I Thank you  in advance,
>>
>> Pierre Berube K9EYE Crystal Lake, IL EN52UF
>>
>> I thought I posted to the correct blind ham list  but never got an answ=
> er,
>> Hopefully this is the correct list.
>>
>>   =20
>>
>>   =20
>>
>>   =20
>>
>>   =20
>>
>>   =20
>>
>> -----Original Message-----
>>
>> From: [log in to unmask] [mailto:[log in to unmask]]
>>
>> Sent: Friday, April 20, 2018 4:01
>>

ATOM RSS1 RSS2